"Welcome
to Southern California's premier kitchen remodeling orange county southern california company.
Our family owned and operated company specializes in
combining superior service with unparalleled quality
to complete the kitchen of your dreams. Specializing
in Custom, Home Office and Kitchen Cabinets in the Orange
County area."
A few customers have asked about the design we use when constructing
our products. For those that are interested, we’ll briefly describe
the construction techniques and materials used.
Our design is a modular blend of European and North American cabinet
construction methods. The final product, once installed, gives you
a traditional face frame cabinet with the functionality of the European
style. We have included all the benefits of European cabinetry in a
Traditional North American style cabinet.
European cabinetry depends in part on the high quality European door
hinge and its ability to adjust in three directions. The quality of
this hinge allows for very accurate placement of the cabinet doors
because of the hinge's mechanical ability to hold that placement. The
high quality of this hinge is the reason for its use in this cabinet
design.
The carcass, or body, of our standard cabinets (both uppers and bases)
are built with Solid 3/4" panels instead of the standard 1/2” or
5/8”. Unlike many other cabinets, there is a back panel. The
back feature alone, results in a cabinet that is of higher quality
than most on the market today. Base and Upper cabinet backing reinforcement
allows easier installation, and eliminates the need to paint the walls
inside and behind the cabinets. It also makes each cabinet a free standing,
strong, high quality component.
Modifications or special material can be substituted when the need
arises. These include using finished 3/4" wood veneer plywood
for microwave, pantry, or glass doors as well as other special situations.
Our design is so flexible that almost all special situations can be
addressed with only very minor changes.
The face frame material hardwood, normally oak, cherry, or maple. The
stiles (being the vertical members of the face frame) are 3/4" thick
by 1 9/16" wide. The bottom rails (being the bottom horizontal
pieces of the face frame) are 3/4" thick by 1 9/16" wide
and 3 1/8" shorter than the width of the standard cabinet design.
The top rails (being the top horizontal pieces of the face frame) are
3/4” thick and are normally 4” wide. Although certain occasions
call for special sized stiles or rails, (such as needing more room
for refrigerator door swing), we usually try to stay with these standard
sizes.
Cabinet door height is variable, particularly in the base units, as
overall door height is dependant on whether or not a drawer assembly
will be fitted above the door(s) in the cabinets. Special size cabinets,
such as those used over the stove, refrigerator, and sink, need smaller
doors to match the reduced cabinet height. Kitchen remodeling orange county california.
...continued on our main site "Our
Cabinets Kitchen Remodeling Orange County "
